- Home
- »
- Our Product Range
- »
- Solar UPS
Solar UPS
Solar Hybrid UPS
Model Name/Number | N/A |
Capacity | N/A |
Tubelight B | N/A |
Max Load | N/A |
Fan B | N/A |
Fan A | N/A |
Specifications
VA Rating/System Voltage | 750VA/12V, 1000VA/12V, 1400VA/24V, 2000VA/36V/48V, 3000VA /48V |
Zero Drop solar charger | With maximum current Up to 20A/40Amps |
MPPT CHARGER | With current up to 30A |
Mains Charger | Up to 15A (20A on request |
No load sleep | If the load is less than 5W the inverter will go to automatic sleep and saves power |
Solar optimization functions | To utilize solar energy even mains available |
LCD Display indications | It provides instantaneous information – input battery voltage, solar charger ON, Charger OFF, solar |
| FAULT, fault messages/Codes, and installer-customized screens |
AC output voltage | 230 V _10V |
Output current waveform | Pure sine wave |
Inverter efficiency | >85% |
Power factor | 0.7 |
Typical transfer time | Less Than 15ms in computer compatible mode |
Protections | Lightning, BAT over Charge, Under Charge, Bat wire removal O/P Short Circuit/Over Load, Phase Reversal |
| Mains High Voltage/Low Voltage Cut OFF, Optional Temp Sensing for MOSFET Protection |
Charger dies/enabler | Automatic or manual inbuilt mains charger disable & enable |
We are majorly looking for Indian as well as foreign enquiries from African countries.
Solar Hybrid UPS With Zero Drop Solar Charge Controller
Brand | Luminous |
Type | Ac Inverters |
Grid Type | On Grid |
Output Frequency | 50 Hz |
Degree Of Protection | IP 21 |
Warranty | 1 Year |
Noise Consumption | <25 dB |
Start Up Input Voltage | 140 V |
Power Factor | 0.8 |
Star Rating | 5 Star |
Features:
- Zero Drop solar charger with maximum current Up to 20A or 40Amps as the case
- Automatic and manual inbuilt mains charger disable and enable
- Auto priority logic to charger from both Mains and solar simultaneously for very low battery condition and to charge battery quickly
- Maximum optimization: (by making the Inverter to work forcefully and discharge the battery , if the battery is full and again restart the solar charger at a set Battery voltage) in this method maximum solar energy is utilized
- No load sleep features: if the load is less than 5W the inverter will go to automatic sleep
- Character display indicating solar charger ON, Charger OFF
- Nominal maximum solar input 20Amps: 12volt 300W, 24Volt 600watt, 36Volt 900watt, 48volt 1200watt
- Nominal maximum solar input 40Amps: 12volt 500W, 24Volt 1000watt, 36Volt 1500watt, 48volt 2000watt
- Efficiency: approx.97%
- Surge Protection. Using mov
Solar Charge Controller
Usage/Application | Collector Controller |
Power | N/A |
Brand | Luminous |
Phase | Single phase |
Type | Automatic |
Solar Array | Dual Array |
Features:
- Maximum Power Point Tracking technology increases the efficiency of your PV system
- Less expensive solar-panels for grid feed in systems can now be used for 12/24 V off-grid systems
- Electronic protection (reverse polarity, over-current, short-circuit, over temperature).
- High efficiency
- DIN Rail compatible
- Negative ground
Technical Specifications:
Type | MPPT 100/30 |
Nominal voltage | 12/24 V, automatic recognition |
Nominal Battery charge current | 30A |
Max. solar input voltage Voc | 95V |
Max. PV input power | 450W @ 12V, 900W @ 24V |
Max. battery charge current | 33A |
Power conversion efficiency | Up to 98% |
Standby power consumption | <30mW at 12V system voltage (<2mA) <80mW at 24V system voltage (<3mA) |
Temperature compensation | -24mV / k (12V); -48mV / k (24V) |
Max. wire size | 35mm² |
Dimensions (W * H * D) | 185 * 150 * 115 mm |
Weight | 1.6 Kg |
Temperature range | -40 to 50°C |
Type of Protection | IP22 |
Additional Information:
- Item Code: 30A-MPPT
Inbuilt MPPT Solar Dual Power UPS
Brand | EMINENT |
Type | Ac Inverters |
Grid Type | On Grid |
Output Frequency | 50 Hz |
Degree Of Protection | IP 21 |
Warranty | 1 Year |
Noise Consumption | <25 dB |
Start Up Input Voltage | 140 V |
Power Factor | 0.8 |
Star Rating | 3 Star |
Power Cord Length | 18" |
Certification | CE |
Topology | Transformered |
Input Connection Type | MC4 2 Pairs |
Output Current | 6.5 A |
MPP Tracker | Single |
MPPT (Maximum Power Point Tracker) Solar Charge Controller -Technical Specification
Maximum Solar PV Current | 30 Amps |
Minimum Solar PV Panel Voltage | Recommended PV voltage is 2 to 3 times the Battery/System voltage for better Solar charging response |
Nominal Maximum Solar Input | 12 Volt 400watts, 2 4 Volt 1000 Watts , 36 volt 1300 watts, 2KVA 48 Volt 1500Watts & 3KVA 48 Volt 1600 Watts |
Peak Efficiency | Approx 97% |
Nominal System Voltage & Minimum Solar Pv panel voltage | 12, 24, 36 or 48 volts DC Max. / 24V, 48V, 60V & 72V |
DC Maximum Self-consumption | 3 Watts |
No Load Sleep | If the load is less than 5W the inverter go to automatic sleep and saves power |
Surge Protection | using M O V |
Advantages of MPPT Solar Charge Controller over PWM Solar charge controller:
The MPPT solar charge controller by the way of its design will extract solar energy and tap the same to almost 95- 100% level on good sun light. But the normal solar charge controller (Zero drop) working on the old concept PWM (Pulse width modulation) is not efficient like MPPT. Hence with PWM charge controller place inside solar inverter the ROI for PV panel is much less and stretched over a longer period .for example if you place a 75watt solar panel on sunlight, with MPPT 72 to 74Watt of solar power per hour could be tapped, But with Zero drop PWM solar charge controller capable of tapping 55Watt of solar energy per hour. This can be proved by measuring Solar current from PV panel using clamp meter and compare with I max (current maximum) from the PV panel manufactures chart. Making MPPT is expensive and that is why the price of the same is high when compared to PWM.